OEM Bulk Packaged Vented Fills for 1-1/2" Hose w/ Color Coded Metallic Inserts (Straight)

Product Description

This product is no longer made in Chrome. Now only offered in Stainless Steel.

Straight Neck
Stainless Steel Scalloped Cap
Color Coded Metallic Inserts
Black Polymer Body and Polymer Tether
Integral Tank Vent with Flame Arrestor (gas and diesel only) and Anti Surge Valve
Ground Wire and Deck Plate Key Not Required
For Matching Waste Plate See Fig. 0568
*Note: Consider using the Mounting Ring (Fig. 0540DPRBLK) for all installations. DP package includes mounting ring.

Technical Information

For Hose Size: 1-1/2"
For Vent Hose: 5/8"
Neck Length: 2-7/16"
Screw Size: #8
O.D. Flange: 3-3/8"
Mounting Hole Diameter: 2-1/8"

Color Coded Metallic Inserts

Gas

Diesel

Water

Mounting Ring for Vented Fills

The use of these heightening rings is required in any application where water might be splashed around a vented fill. The ring raises the opening between the fuel cap and fill an additional 3/8" above the deck surface, thereby reducing the likelihood that splashed water will enter the fuel system through the breathing vent. The split version of the ring is designed for aftermarket use on existing installations. In most cases, it allows the ring to be added without disconnecting fuel and vent hoses from the fill. For new OEM installations, rings are supplied without the split since they can be installed before hoses are connected to the fill.

NOTE: The ring will not prevent water from entering the system if the cap becomes submerged or substantially flooded. If this situation exists, the fill/vent must be moved to a dry location or replaced with a sealed cap and a separate vent located elsewhere.

Retail Pkg.	OEM Bulk Pkg.
0540DPRBLK	0540RNGBLK

Ordering Information

Marked For:	Cap Type	OEM Bulk Pkg. 25 Pcs.	Ship Wt. Carton Lbs. DP/OEM Bulk
Gas	Stainless	0581G00STS*	15.8
Diesel	Stainless	0581D00STS*	15.8
Water	Stainless	0581W00STS	15.8

Instructions & Resources

Installation Instructions

View 0581 in our Print Catalog

Product Notes

* NOTE: These Fills Meet the Requirements of U.S.C.G. Safety Standards, January 31, 1977, for Gasoline Fuel Systems, 33 CFR 183. Fills shown on this page DO NOT meet the requirements for 40 CFR 1060 sub part B Emissions Standards and Related Requirements.

*Consider the use of the Mounting Ring (Fig. 0540DPRBLK) for all installations (Included in Dealer Pkg.)